металлообрабатывающие станки / прочие металлообрабатывающие станки
Производитель: DMG MORI
Модель:DMF 400|11
Номер позиции: 166192326
Количество: 1
Дата: 09.01.2025
Местоположение:
Германия
Цена:
Seller-item-No.:030335
| General | |
| Travelling column milling machine; Control: CELOS X with Siemens 840D SL Operate | |
| Technical Data | |
| Rapid traverse longitudinal/transverse/vertical | 42/42/42 m/min |
| Working area 1 | |
| Longitudinal | 4000 mm |
| Cross | 1100 mm |
| Vertical | 1050 mm |
| Tool changer | |
| Type of magazine | Chain |
| Type of gripper | Double gripper |
| Number of tools | 50 |
| NC-swivel head (B-axis) | Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel range: +/- 120° Swivel speed: 50 rpm |
| Spindle speed 12,000 rpm, 430 Nm | Motor spindle powerMASTER SK50 Spindle speed 20 - 12.000 min-1 for tool holder according to DIN ISO 7388-1-A50 Output 52/42 kW (69.7/56.3 hp) Torque 430/300 Nm (318.2/222 ft lbs) (40/100% duty cycle) Tool magazine 30 places SK50 At speed 10,000-12,000 min |
| Fixed table | Fixed Table |
| Table surface 4600 x 1100 mm | |
| Direct measuring system | Direct path measuring system |
| Cabine | Full protection cabin |
| Tool magazine 50 places | Tool magazine 50 places SK50/HSK-A100 Chain type with double gripper |
| NC-subtable 700-1, A-axis, left working area | NC-sub table 700-1 (A-axis) Left working area |
| Removable partition wall DMF |11 | Partition wall removable for pendulum machining, 2 working spaces |
| Infrared measuring probe PP60 optical | Infrared touch Probe for ISO 50 make Renishaw PP 60 optical (OMP 60) Tool taper suitable for the spindle |
| 3D quickSET elevated constructuion | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe) |
| Tool measuring Heidenhain TT160 | Tool measuring device Heidenhain TT160 Tool length and diameter measurement with cleaning air-blast, Calibration Tool with tool holder (not with Laser possible, for pendulum machining please order 2 pieces) |
| Inner coolant supply 40Bar/980l | Internal coolant supply (ICS) with paper type filter 40 Bar/980 l // 580 psi/258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle |
| Air blast through spindle centre | Air blast through spindle centre activated by M function, maintained air, low oil rate possible |
| Oil mist separator | Oil and D5152871 emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h |
| Sensor package i4.0 | Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor |
| Signal lamp 4-colour | Signal lamp, 4 colours |
| Door drive for working area doors | Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in. |
| ATC (Application Tuning Cycle) | ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| Special equipment | Trade fair design Green Mode, consisting of: -Brake Energy Recovery -LED lights -Adaptive Feed Control -Advanced Energy Monitoring -Air Leakage Monitoring Chip conveyor with elevated discharge 1250mm |
| 2016 | DMG MORI | DMF 260/11 | |
| DMG MORI | DMF 260|11 | ||
| DMG MORI | DMF 300|11 | ||
| DMG MORI | DMF 260|11 | ||
| DMG MORI | DMF 260|11 | ||
| DMG MORI | DMF 300|11 | ||
| DMG MORI | DMF 300|8 | ||
| 2016 | DMG MORI | DMF 260/11 KGT | |
| 2016 | DMG MORI | DMF 260/11 KGT | |
| 2017 | DMG MORI | NHX 4000 |
